Filter
Top Products
Quatech SDS User’s Manual Installing the device drivers
Figure 36 - Describe the Remote Subnet screen
Figure 37 explains how to
gather the information you
need to search for your SDS on
a remote subnet.
Step Procedure Description
Step 46 Locate the target subnet’s default
gateway address.
You can get this address from a device
already on the target subnet. Your
system administrator should also be
able to provide this information.
Step 47 Enter the target subnet’s default gateway
address in the space provided.
Press Next to continue.
The Wizard initiates a search of the
specified target subnet.
The Search network for Serial Device
Servers screen displays.
Go to
□ Step 10.
July 2005 940-0183-153 Page 39