Filter
Top Products
Quatech SDS User’s Manual Configuring the SDS using a Web interface
Performing administrative functions
The Admin functions let you update the software, assign a descriptive
name to the SDS, and manage users (control who can access the SDS
from the Web interface). You can access these functions by selecting
Admin from the selection bar.
Managing users
Initially, the SDS is configured to have no exclusive users. This
means that anyone with the device drivers installed and who knows
the SDS’ IP address can use the Web interface to configure and
manage the SDS.
Note: You can create a
maximum of ten users for each
SDS.
You can create users to restrict this type of access to approved
personnel only. Once you create a user, only someone using that user
ID and password has Web access to the SDS.
Showing users
Step Procedure Description
Preliminary
Step
Click on Admin in the selection bar and
then select Show Users from the left
panel.
The Show Users screen displays.
Passwords appear as asterisks.
Figure 61 - Show Users screen
Step Procedure Description
Step 1 Make note of any users you want to add
or delete. Select Add/Del Users to add or
remove users.
Write down the user’s name exactly as it
appears including any spaces.
Adding users
Step Procedure Description
Preliminary
Step
Click on Admin in the selection bar and
then select Add/Del User from the left
panel.
The Add/Del Users screen displays.
July 2005 940-0183-153 Page 75