Filter
Top Products
Installing the device drivers Quatech SDS User’s Manual
Figure 35 - Locate the Serial Device Server on a remote subnet screen
Figure 36 explains the options
you have to search for an SDS
on a remote subnet.
Step Procedure Description
Step 45 Select one of the three following options:
¾ The SDS is preconfigured for the
remote subnet.
Press Next to continue.
¾ The SDS is set to use DHCP.
Press Next to continue.
Note: If DHCP is disabled on the SDS, press
the Reset button on the back to enable it.
¾ Neither of the above.
Press Next to continue.
The Describe the Remote Subnet screen
displays. Continue with □ Step 46.
The Describe the Remote Subnet screen
displays. Continue with □ Step 46.
The Locate the Serial Device Server
screen displays. Go to
□ Step 48.
Page 38 940-0183-153 July 2005