Renesas M3062PT3-RPD-E Network Card User Manual


 
M3062PT3-RPD-E User’s Manual 1. Outline
REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 13 of 104
1. Outline
This chapter describes the package components, the system configuration and the preparation for using this product for the first
time.
1.1 Package Components
The M3062PT3-RPD-E package consists of the following items. When unpacking it, check to see if your M3062PT3-RPD-E
contains all of these items.
Table 1.1 Package components
Item Quantity
M3062PT3-RPD-E emulation pod 1
FLX120-RPD flexible cable for connecting PC4701 1
M30800T-PTC converter board for 100-pin 0.65mm pitch LCC 1
IC61-1004-051 100-pin 0.65mm pitch LCC socket made by Yamaichi Electronics Co., Ltd. 1
OSC-3 16MHz oscillator circuit board for main clock (preinstalled) 1
OSC-2 oscillator circuit board (bare board)
1
Network resistors for pulling up ports P0--P5 (51k x 8) 6
H/W Tool Customer Registration Sheet (English) 1
H/W Tool Customer Registration Sheet (Japanese) 1
Repair request sheet (English) 1
Repair request sheet (Japanese) 1
M3062PT3-RPD-E User’s Manual (This manual) 1
M3062PT3-RPD-E User’s Manual (Japanese) 1
* Please keep the M3062PT3-RPD-E's packing box and cushion material in your place for reuse at a later time when sending
your product for repair or other purposes. Always use these packing box and cushion material when transporting this
product.
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.