Filter
Top Products
M3062PT3-RPD-E User’s Manual 2. Setup
REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 24 of 104
2.4.2 Connecting the FLX120-RPD to the Emulation Pod
Figure 2.3 shows how to connect the FLX120-RPD and the emulation pod.
Figure 2.3 Connecting the FLX120-RPD to the emulation pod
CAUTION
Note on Connecting the FLX120-RPD and emulation pod:
z Always shut OFF power before connecting the emulation pod and the FLX120-RPD. Otherwise, the internal
circuits may be damaged.
IMPORTANT
Note on Securing the Screws:
z After connecting the emulation pod and the FLX120-RPD, be sure to secure the screws mounted in both sides
of the connector cover.
FLX120-RPD (Secure with the screws)
Emulation pod