Filter
Top Products
M3062PT3-RPD-E User’s Manual 4. Hardware Specifications
REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 89 of 104
4.5.2 External Dimensions of the M30800T-PTC
Figure 4.9 shows external dimensions of the converter board M30800T-PTC for a 100-pin LCC (included with the
M3062PT3-RPD-E).
1
30
31
50
CN2
CN1
100
81
80
51
MADE I N JAPAN
55.0
40.0
13.5
13.5
M 30800T- PTC
10.8
16.3
[ External dimension when connecting 100- pin LCC socket]
Unit : mm
*1 When using the AXS4003M295 C made
by Matsushita Electric Works, Ltd., and
IC61-1004- 051 made by Yamaichi
Electronics Co., Ltd, be sure to create foot
patterns for the holding metal fixtures in
four locations
.
*2 When using the AXS4003M295 C made
by Matsushita Electric Works, Ltd., note
that the contacts of the IC socket proper
touch the PC board in the shaded section
.
Therefore, be especially careful with
pattern wiring to ensure that other pins will
not be shorted. (Through holes are not
accepted.)
0.65
0.35
19.2
18.85
19.90
26.10
12.35
16.1
24.5
4-R0.25
Foot pattern for
holding metal fixture *1
Pattern wiring *2
13.8
21.4
27.6
19.9
Unit: mm
12.8
Figure 4.9 External dimensions of the M30800T-PTC