TROUBLESHOOTING
8.12 C
HAPTER
E
IGHT :
T
ROUBLESHOOTING
8
Problem
Transparencies stick
together in printer exit
tray
Use only recommended transparencies.
Remove each transparency as it exits from the printer.
Solution
Envelopes skew or fail to
feed correctly.
Make sure the envelope guides have been turned to the
envelope load position.
Make sure envelopes are loaded behind the envelope
guides.
Make sure the paper guide do not cause envelopes to
bow in the automatic sheet feed.
Make sure the paper load lever is closed.
Specifications
General
Fax
Communication System PSTN & PABX
Compatibility ITU GROUP 3
Compression Scheme MH/MR/MMR
Modem Speed 9600/7200/4800/2400 bps
Scanning Method Sheet-feed scanning using CIS
Input Document Size 8.5 Inch (216 mm)
Scanning Resolution 200 dpi
ADF Capacity 30 Sheets (0.0039 in/0.1 mm)
20 Sheets (0.0033 ~ 0.0051 in/0.085 - 0.13 mm)
Machine Size (H X W X D) 10.4 X 12.7 X 17.9 Inch (263 X 323 X 454 mm)
Machine Weight 7.0 Kg
Power Requirement See power rating attached on back of the paper bin
Power Consumption 12 W (Stand-by), 30.66 W (Maximum when in use)
Temperature Range 10 ~ 40 ûC (Operation Range)
16 ~ 32 ûC (Optimum Operation Range)
Humidity Range 8 to 80 %RH (Non-Condensing)
A-Chapter 8(US) 4/16/98 8:47 AM Page 8.12