Samsung SF4000 Fax Machine User Manual


 
INSTALLATION AND SETUP
2.14 C
HAPTER
T
WO :
I
NSTALLATION AND
S
ETUP
1. Connect the parallel printer cable to the
36 pin printer jack on your machine.
You must use a parallel cable that
supports IEEE-P1284 bidirectional
communications.
2. Fasten the metal clips to the parallel
cable.
3. Connect the other end of the parallel
cable to your computer.
Refer to the instruction manual that
came with your computer to
connect the other end of the printer
cable to your computer.
Connecting SF4100 to Your PC
Use the printer cable that supports bidirectional communications to connect your machine
and the computer.
Note : Make sure you turn the power off by plugging out the power cord before connecting
the machine to your PC. When the connection is completed, turn the power on.
2
G-Chapter 2(US) 4/16/98 8:30 AM Page 2.14