Filter
Top Products
64
ENGLISH
Introduction
If control via the display module is selected :
Front panel Use of keys and meaning of displays
 Ú
Flashing :
indicates the selected direction of rotation
Steady :
indicates the direction of motor rotation
LOC Indicates control via the display module
PROG Appears in setup and programming mode
Flashing :
indicates that a value has been modified but not saved
4-character display :
displays numeric values and codes
One line of 16 characters :
displays messages in plain text
Scroll through menus or parameters and set a value
Return to the previous menu or abort the current adjustment and return to the original value
Select a menu, confirm and save a selection or setting
Reverse the direction of rotation
Command to start the motor running
Command to stop the motor or reset the fault. The key's "STOP" function can be inhibited
via the program ("CONTROL" menu).
Rear view
Connector :
-for direct connection of the display module to the speed
controller
- for remote operation, the display module can be connected via
a cable provided in the VW3A58103 kit..
Access locking switch :
- position : Settings and configuration not accessible
- position : Settings accessible
- position : Settings and configuration accessible
LOC PROG
ESC
ENT
RUN
FWD
REV
STOP
RESET
ESC
ENT
FWD
REV
RUN
STOP
RESET
GP_ATV58_EN.fm Page 64 Mardi, 2. avril 2002 6:09 18