Filter
Top Products
2-99
COPIER
Contents
• If user authentication is enabled, the login screen will appear when the [Interrupt] key is selected. Enter your user name
and password to log in. The number of copies made will be added to the count of the user that logged in.
• Depending on the settings of the job in progress, the [Interrupt] key may not appear.
• Depending on the settings of the job in progress, the [Reserve] key may appear instead of the [Interrupt] key. Unlike
interrupt copy, reserve copy does not temporarily stop the job in progress. Instead, the reserve copy job begins when the
job in progress is finished.
• Interrupt copy cannot be used in combination with the following special modes:
Job Build, Card Shot
• If the document glass is used for an interrupt copy job, 2-sided copying, sort copying, and staple sort copying cannot be
selected. If any of these functions are necessary, use the automatic document feeder.
• The [Interrupt] key can be selected in the scanning completion check screen to temporarily stop scanning and scan an
original or originals for a different job. When scanning for the interrupt job is finished, scanning of the originals for the
interrupted job will resume. The interrupt job will be output when the interrupted copy job is completed.