Filter
Top Products
6-21
SYSTEM SETTINGS
Contents
OPERATION PANEL (ADMINISTRATOR)
Copy Function Settings
Item Factory default setting Page
■ Copy Function Settings
6-28
● Initial Status Settings
6-28
X Colour Mode Full Colour
X Paper Tray Tray 1
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Auto
● Other Settings 6-29
X Copy Exposure Adjustment
6-29Colour 5
Black & White 5
X Add or Change Extra Preset Ratios – 6-29
X Setting a Maximum Number of Copies 999 6-29
X Initial Margin Shift Setting
6-29Side 1 10 mm (1/2")
Side 2 10 mm (1/2")
X Erase Width Adjustment
6-29
Edge Clearance Width 10 mm (1/2")
X Card Shot Settings
6-29Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
X Disabling Deletion of Job Programs Disabled 6-29
X Disabling of Bypass-Tray in Duplex Copy Disabled 6-29
X Disabling of Auto Paper Selection Disabled 6-29
X Auto Selection of Paper Tray that was Last Loaded Disabled 6-29
X Colour 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 6-30
X Colour Quick Scan from Document Glass Disabled 6-30
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 6-30
X B/W Quick Scan from Document Glass Disabled 6-30
● Colour Adjustments 6-31
X Initial Colour Balance Setting Factory default state 6-31
X Auto Colour Calibration – 6-31