Filter
Top Products
6-85
SYSTEM SETTINGS
Contents
WEB PAGE (ADMINISTRATOR)
I-Fax Settings
These settings are used to configure the default settings for Internet fax. Select [System Settings] - [Image Send
Settings] - [I-Fax Settings] in the menu bar, and configure the settings.
Click the [Default Settings] tab and configure the
settings.
Auto Wake Up Print
When the [POWER] key ( ) is "off" (but the main power
switch is "on") and an Internet fax is received, this function
activates the machine and prints the fax.
When this function is disabled, received Internet faxes are
not printed until the [POWER] key ( ) is switched "on".
Compression Setting
This is used to set the default compression mode for
Internet fax transmission.
The settings are shown below.
•MH (G3)
• MMR (G4)
Speaker Volume Setting
This is used to adjust the volume of fax receive signals
and communication error signals heard through the
speaker.
A fax receive signal sounds after the machine checks the
mail server and retrieves received faxes. A communication
error signal sounds when a delivery failed e-mail is received
from the destination Internet fax machine.
Original Print on Transaction
Report
When a transaction report is printed, this is used to print
part of the first page of the transmitted original on the
transaction report. Select one of the settings below.
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
This setting will not be effective if "Transaction Report
Print Select Setting" below is set to "No Printed Report".
Transaction Report Print Select
Setting
This is used to select whether or not a transaction report
will be printed, and if printed, the condition for being
printed. Select a setting for each of the following
operations:
Single Sending
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Broadcasting
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Receiving
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
When a transaction report is printed, you can have part
of the first page of the transmitted original printed on the
transaction report. For more information, see "Original
Print on Transaction Report".
These settings can be configured when the Internet fax expansion kit is installed.
Default Settings