Filter
Top Products
2-3
COPIER
Contents
This section provides information that you should know before using the machine as a copier.
BASE SCREEN OF COPY MODE
Press the [COPY] key in the display to open the base screen of copy mode.
The base screen shows messages and keys necessary for copying, and settings that have been selected.
(1) [Original] key
Select to specify the original size.
If the original size displayed in this key is different from
the size of the original you placed, or if the original size is
not displayed, be sure to select this key and specify the
correct size.
☞ ORIGINAL SIZES (page 2-28)
(2) [Paper Select] key
Select this key to change the paper (tray) that is used.
The tray, paper size, and paper type will appear.
☞ PAPER TRAYS (page 2-9)
(3) [Exposure] key
This shows the current copy exposure and original type
settings. Select this key to change the exposure or
original type setting.
☞ CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE (page 2-23)
(4) [Copy Ratio] key
This shows the current copy ratio. Select this key to
adjust the copy ratio.
☞ REDUCTION/ENLARGEMENT/ZOOM (page 2-25)
(5) [Colour Mode] key
Select this to change the colour mode.
☞ COLOUR COPY MODES (page 2-21)
(6) [2-Sided Copy] key
Select this key to select the 2-sided copying function.
☞ AUTOMATIC 2-SIDED COPYING (page 2-15)
(7) [Output] key
Select this to select an output function such as sort,
group, offset, or staple sort.
☞ OUTPUT (page 2-33)
(8) [Special Modes] key
Select this key to select special modes such as Margin
Shift and Edge Erase.
☞ SPECIAL MODES (page 2-39)
BEFORE USING THE MACHINE AS A
COPIER
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)(10) (12)(9)