Filter
Top Products
2-42
COPIER
Contents
3
Select the layout.
(1) Select the [Layout] key.
(2) Select the layout.
Select the order in which the originals will be arranged on
the copy.
The arrows in the above diagram indicate how the images
are arranged.
4
Select the border.
(1) Select the [Border] key.
(2) Select the border.
No lines, solid lines, or broken lines can be selected.
(3) Select the [Basic Menu] key.
You will return to the base screen of copy mode.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned
and then select the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for
the first original.)
To cancel scanning and copying...
Press the [STOP] key ( ).
When using the 2in1 function, the appropriate copy ratio will be automatically set based on the original size, paper size, and
the number of originals to be copied onto one sheet. The minimum possible reduction ratio is 50%. The original size, paper
size, and selected number of original pages may require that the ratio be less than 50%. As copying will take place at 50% in
this case, part of the original images may be cut off.
To cancel a 2in1 setting...
Select the [Cancel] key in the screen of step 3.
OKBACK
OKBACK
(1)
(2)
Layout
OKBACK
OKBACK
(1)
(2)
(3)