Filter
Top Products
2-50
COPIER
Contents
ADDING MARGINS (Margin Shift)
This function is used to shift the copy image right, left, up or down to adjust the margin.
This is convenient when you wish to hole punch the copies.
Shifting the image to the right so the copies can be bound at the left edge with a string
Keys in the display can be selected with the arrow keys and the [OK] key.
1
1
Not using margin shift Using margin shift
The punch holes cut off
part of the image
The image is moved to
allow space for the holes
so the image is not cut off.
1
1
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
After placing the original, specify the original size.
☞ ORIGINAL SIZES (page 2-28)
2
Select the special modes.
(1) Select the [Special Modes] key.
(2) Select the [Margin Shift] key.
☞ Special modes menu (1st screen) (page 2-39)
3
Set the margin shift.
(1) Select the margin shift position.
Select one of the 4 positions.
(2) Set the amount of the margin shift.
Select the number display and press the [OK] key. A
number entry screen will appear. Enter the desired
number with the numeric keys and select the [OK] key in
the number entry screen.
0 mm to 20 mm (0" to 1") can be entered.
You can also change the number with the keys.
(3) Select the [Basic Menu] key.
You will return to the base screen of copy mode.
OKBACK
OKBACK
(3)
(1)
(2)