Filter
Top Products
Getting to Know Your ColorgrafX X2 9
Printer components (con’t)
Operation panel
The printer’s operation panel is used to control the
printer.
Note: The operation panel can over-ride a print job
being received from a remote computer. Always
check that there is not a job in progress before
assuming control of the printer using the operation
panel.
The operation panel includes the:
•
LCD display -- The LCD display shows the
current status of the printer. Menu items,
parameters, or error messages are displayed on
the 20 characters x 4 rows LCD (Liquid Crystal
Display).
•
Power LED, the top LED on the left side of the
LCD display. When the printer is turned on, the
green LED is lit and is dark when the printer is
off.
•
Ready LED, the second LED from the top.
When the printer is ready, the green LED is lit
and is dark when the printer is not ready.
•
Error LED, the third LED from the top. When
the printer is in error status, the red LED is lit
and the printer stops.
•
Warning LED, the bottom LED on the left side
of the LCD display. When the printer is in
warning status, the red LED is lit.
Note: LEDs 3 and 4 are also used to indicate a low
media status. If the media roll contains 20% or less
media, the associated LED will flash.
•
The right and left arrow buttons, located at
the bottom of the operation panel. They are
used to select menu options within a menu level.