Sharp X2 Printer User Manual


 
Supplies 35
Loading and removing media (con’t)
When to replace media
EMPTY MEDIA ROLL
LOAD MEDIA
SEE USER GUIDE
[ER: 3A24]
The media should be replaced whenever the LCD display
displays
Empty Media Roll
.
Caution: The media rolls are heavy. Handle carefully and ask
for assistance to avoid personal injury, damage to the printer, o
r
damage to the media.
Removing media
The steps to remove media are:
Procedures
1. Open the printer top cover.
Be sure to open or close the top cover slowly,
holding with both hands while standing in front
of the printer. Be careful to not let your fingers
or hands get caught when the cover closes.
When changing media rolls, the release lever on
the right side of the printer is not used and
should be left in its closed position.