Filter
Top Products
Connecting to a Local Area Network
45
Connecting to a Local Area Network
You can connect your notebook to 10BASE-T and 100BASE-TX-type Lo cal
Area Networks (LANs). For the detailed settings and devices needed to connect
to the network, ask your network administrator.
Setting up your Ethernet connection
To connect to the network
1 Click Start on the Windows® taskbar, and select My Computer.
2 In the Other Places box on the left, click My Network Places.
3 In the Network Tasks box, click Add a network place or click Set up a home
or small office network, depending on your configuration . Depending on
your choice, either the Add Network Place W izard or Network Setup Wi zard
window appears.
4 Follow the on-screen instructions.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet
port. Do not connect any other type of network cable or phone cable.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Ethernet
port