Filter
Top Products
I
..
Setbaseunitforlinespacing
MODE
ASCIIQecimaHexade
IBM
<ESC> “ [ “ “ \ “
27 91 92 IB 5B 5C
<4> <0> <0>
4 o“ o 04 00 00
<O>
nl n2 O nl n2 0 n n
Sets the base unit for the line spacing commands,
<ESC> “3” and <ESC> “J”, as shown below:
Linspaciun
o
18
1/1 i
o
21
1/2i
1
104
1/ 360
i
This command becomes effective only after <ESC> “3” or
cESC> “J” is received. The default base unit is set to
1/216”.
Setlinespacing
MODE
ASCIIDecimaHexade
Both
<ESC> “3” n
27 51
n
IB
33 n
Sets the distance the paper advances or reverses in sub-
sequent line feeds to n/180 inch. n/216 inch (IBM
mode) or n/360 inch (IBM mode) according to the pre-
ceding base unit.
The value of n is between O and 255. If n = O, in Stan-
dard mode the line-feed distance is set to O,but in IBM
mode the command is ignored.
Page111