Filter
Top Products
restart from the point where it left off when you make
the printer ready again.
Feeding paper through the printer
There are a number of ways in which you can feed paper
through the printer.
One line or several lines at a time
Make the printer not-ready, and press the [PAPER FEED)
button. This will feed the paper farward one line. If you
continue to hold down the
(PAPER FEED] button, the
printer will continue to feed the paper one line at a time.
Make the printer ready again to continue printing.
A page at a time
This will either eject a cut sheet or feed fanfold paper to
the top of the next sheet. To determine where the top of
a sheet should be, see “Setting the top of a form” on
page 35.
. If you want to feed a page of paper through the
printer, make the printer not-ready. Press and hold
down the
[PAPER FEED] button.
. While holding down the
[PAPER FEED] button, press the
- button.
. Release both buttons at the same time. The paper will
feed through.
Individual form tear-off
You can tear off individual sheets (for instance, sales
invoices) from fanfold paper.’
● While the printer is in ready mode, press and hold
down the [~] button.
c Press the
[PAPER FEED) button. The paper will move
forward about
off the sheet.
Page34
2 inches (50mm), so that you can tear