Filter
Top Products
I
P c
The release lever is in the
wrong position.
r--
The print gap is not set
correctly.
P c
A monochrome ribbon
cartridge is installed.
A printer that does not .
support color has been
selected (either in Windows
or in your application
program).
Electronic DIP Switch
settings prevent use of
color.
A
Make sure that the lever is
pushed back if you are
printing on single sheets,
or pulled forward if you are
using fanfold stationery.
Remove paper from the
printer. Reload paper. Refer
to page 26 and page 27.
Check the print gap. If
necessary, use the
adjustment lever to set the
print gap. See “Adjusting
the print gap” on page 24.
A
Install a color ribbon
cartridge.
Select a different printer
driver. See “Setting up the
printer in Windows” on
page 19.
Check the settings. See “A4
– Color and zoom” on
page 57.
Page78