Star Micronics LC24-300 Printer User Manual


 
I
Setbottommargin
MODE
ASCIIDecima
Hexadec
Both
<ESC> “N”
n 27 78 n IB 4E n
Sets the bottom margin to n lines, where n is between 1
and 127 in Standard mode or between 1 and 255 in IBM
mode. The bottom margin is reset when you change the
page length.
Cancelbottommargin
/ MODE I
ASCIII Decimal I Hexadecimal I
I Both
I <ESC> “O” I 2779 I IB 4F I
Cancels the bottom margin.
Formfeed
MODEASCII
Decima
Hexadec
Both
<FF1 Oc
Feeds the paper to the top of the next page according to
the current page length, and moves the print position to
the left margin. When the automatic sheet feeder (ASF)
is selected with EDS switch A6, this command ejects the
current page.
Setverticaltabstops
MODE
ASCIIDecima
Hexadec
Both
<ESC> “B”
n 27 66 nl IB 42 nl
n2 . <0>
n2 . . 0 n2 ...00
Cancels all current vertical tab stops and sets new verti-
cal tab stops at lines rd, n2, etc., where nl, n2, etc. are
numbers between 1 and 255. A maximum of 16 vertical
tab stops can be set. The tab stops must be specified in
ascending order; any violation of ascending order termi-
nates the tab stop list. Standard termination is by the
<0> control code. The vertical tab stops are set in terms
of the current line spacing and do not move if the line
spacing is changed later.
Page115