Filter
Top Products
I
ing, but for most purposes, you’ll probably find that bi-
directional printing is accurate enough.
B2 - Paper-out
When ON, the printer takes note of its internal paper
sensor. It prints to the bottom edge of the paper and
then stops, waiting for a new sheet. If this switch is OFF,
the printer ignores its sensor and will continue printing,
even if there is no paper to print on.
B3 - Tear-off
If you set this switch to OFF, this allows you to use the
fanfold tear-off function (page 34). If you this switch is
ON, the function is disabled.
B4 - Reserved
Leave this switch on.
B5 and B6 - Multi-part mode
When using multi-part forms, there are three settings
you can make, depending on the number of sheets you
are feeding through the printer at one time:
Multi-part mode
\ B5 I B6 I
Normal mode (one sheet)
ON
ON
Multi-part 1 (up to 3 sheets)
ON
OFF
Multi-part 2 (up to 5 sheets)
OFF
ON
Page58