Filter
Top Products
●
●
●
●
Make sure that the mounting brackets on both sides
of the SF- 10DW are properly mounted on the printer.
If they have been properly mounted, you can use the
platen knob to turn the ejection roller on the SF-
10DW.
Install the printer cover supplied with the SF-10DW .
Install the hopper attachment on top of the SF- 10DW
hopper support section.
Fit the stacker attachment into the fixing groove in
the front of the sheet feeder. You may need to squeeze
the stacker attachment a little to fit it.
●
Keep the printer’s front cover, mute cover, roller unit
and paper guide together for possible future use.
Using the SF-70DW
.
If you have already loaded fanfold paper, park the
paper (page 31).
Page65