Filter
Top Products
I
U t ElD s
●
●
●
●
●
To use the Electronic DIP Switch mode, turn the
printer OFF.
Press and hold down the
I the
and the (@RTiNE]buttons.
Turn the printer on while holding down these but-
tons. Wait a few seconds and release them.
The display will show:
R]. 0“
EDS
This means that we are in Electronic DIP Switch
mode, that switch number 1 of bank A (switch “Al”)
has been selected, and it is now ON.
Banks and numbers
Conventional DIP switches are arranged in banks. Each
bank contains a number of different switches. If the
LC24-300 Colour had conventional DIP switches, this is
how they would look:
A
B C D E
F
As it is, the LC24-300 Colour switches are represented
on the front panel.
Selecting the switch bank
To select a switch bank in Electronic DIP Switch mode,
press the [T6FR_]button. With each press of the [~]
button, the display will change from “A” to “B”, through
“F”, and back to “A” again. If you have selected a switch
number other than “l“, the number will be changed to
“1“ when you go to the next bank.
Page53