Filter
Top Products
● While holding down the [~] button, turn the
printer on again.
. Keep holding down the [~) button until the printer
beeps, and the display shows m.
You can put the printer in not-ready mode and change
the pitch using the [FE@ button (“Changing the pitch of
the font” on page 39). Any software commands from
your computer that try to change the pitch will be
ignored by the printer.
Pitch unlock
Reset the printer. See “Setting the printer back to
default settings” on page 44. This will also reset the font
lock (see above).
Pitch and font lock
This stops you from accidentally changing the font and/
or the pitch with software commands.
. Turn the printer OFF (front switch).
. Press and hold down the [T6NY]button and the [~]
button.
● While holding down the [~) button and the (~]
button, turn the printer on again.
● Keep holding down the [*] and [7%EK’buttons until
the printer beeps, and the display shows both _
and _
You can put the printer in not-ready mode and change
fonts and pitch using the [m) button and the [~]
button (“Selecting the different fonts” on page 38). Any
software commands from your computer that try to
change the pitch or font will be ignored by the printer.
Pitch and font unlock
Reset the printer. See “Setting the printer back to
default settings” on page 44. This will reset the pitch
lock and the font lock.
Page46