Filter
Top Products
interference from nearby
electrical devices or by a
low level of humidity is
affecting the printer’s
operation.
Inappropriate settings have
been selected from your
application program.
P c
The wrong emulation is
selected.
The wrong character table,
code page or international
character set is selected.
Static electricity caused by
interference from nearby
electrical devices or by a
low level of humidity is
affecting the printer’s
operation.
Inappropriate settings have
been selected from your
application program.
There are wires missing
from the print head.
Make sure the printer is
not too close to any devices
with electric motors, or
raise the humidity level.
Choose different settings in
your application.
Action
Check the emulation
selection. See “AIL
Emulation” on page 56.
Check Electronic DIP
Switch settings. See “D2
through D4 – character
code tables” on page 60.
Make sure”~hatthe printer
is not too close to any
devices with electric
motors, or raise the
humidity level.
Choose different settings in
your application.
Return the printer to your
dealer for repair.
Page84