Filter
Top Products
is narrowed (thin paper), and if you pull it towards the
front, the gap is widened (thick paper).
As you move the lever, you can feel it click between the
six different positions. Position number 2 (starting from
the rearmost position) is the one you will generally use
for single sheets of paper (fanfold or cut sheet). Here is a
table for the adjustment lever when you use multi-part
sets.
Paper Weightof each
Thickness
Recommended
type sheet
leverposition
‘total‘n ‘m)
(1 = rearmost)
Sincjle
14 to 24 Ibs (52to 90 gsm)
007to 0.12
2 or3
2-part
11 to 14 Ibs (40to 52 gsm)
0.12 to 0.14
2 or 3
3-part
11 to 14 Ibs (40to 52 gsm)
0.18 to 0.21
3 or 4
4-part 11 to 14 Ibs (40to 52 gsm)
0.24 to 0.28
4 or 5
5-part
11 to 14 Ibs (40to 52 gsm)
0.30 to 0.35 5 or 6
Note: Ifyouusemulti-partsets,setuptheMulti-Partsettingusing
theElectronicDIPswitchesasdescribedin “B5andB6- Multi-
partmode”onpage58.
Page25