Filter
Top Products
igure 1-7. Mounting the paper guide for single sheets
Semiautomatic loading
Single sheets can be loaded manually with power off, or semiauto-
matically with power on. We will start the easy way with semiautomatic
loading.
1. Check that the releaseleverisdown and the bailleverback (bailclosed),
then switch power on. You willhear a short beep tone and the Power
indicator on thecontrol panelwillflash. Theseare theprinter’spaper-out
signals.
2. Place a singlesheeton the paper guideand insert it down into the entry
slot. You will feel a slight resistance as the paper engages the paper
detector lever. Work the paper past this resistance and insert it down
as far as it willgo.
3. Move the bail lever forward. When the bail opens, the printer feeds
the paper automatically.
4. Move the bail lever back, The paper will feed slightly forward again,
ending in position to print with a top margin of about one inch.