Star Micronics NX-I 00011 Printer User Manual


 
Absolute horizontal tab in columns
Model ASCII
I
Decimal
I
Hexadecimal
1
<ESC>
“f’
“o” n 27102 48 n
Both
[lB 66 30 n
<ESC>
“r’
<0> n
27102 0 n
IB 66 00 n
Moves the next print position to column
n from the left margin, where
n is between Oand 127.
GRAPHICS COMMANDS
Print single-density 8-bit graphics
IModel ASCII I Decimal I Hexadecimal !
+
<ESC>
“K”
nl n2
Both
27 75
nl n2
IB 4B n] n2
ml m2 .
ml m2
ml m2
Prints bit-image graphics at 60 dots per inch horizontally. The graphic
image is 8 dots high and
nl + n2 x 256 dots wide. Maximum width is
8 inches (480dots).
ml, m2, . are the dot data, each a l-byte value from
Oto 255 representing 8 vertical dots, with the most significant bit at the
top and the least significantbit at the bottom. The number of data bytes
must be
nl + n2 x 256. Dots beyond the right margin are ignored. At
the endof bit-imageprinting the printer returns automatically to character
mode.
Print double-density 8-bit graphics
Mode
ASCII
Decimal
Hexadecimal
< ESC>
“L” nl n2
27 76 nl
n2
Both
IB 4C
nl n2
ml m2
ml m2
ml m2
Prints bit-image graphics at 120 dots per inch horizontally (maximum
960 dots wide). See < ESC> “K” for other information.
Print double-density, double-speed 8-bit graphics
Mode ASCI!
Decimal
Hexadecimal
< ESC>
“Y” nl
n2
27 89 nl n2
Both
IB 59
nl n2
ml m2 ...
ml m2 ...
ml m2
Prints bit-image graphics at 120 dots per inch horizontally (maximum
960 dots wide), skipping every second dot in the horizontal direction.
See < ESC> “K” for other information.
80
.