Star Micronics NX-I 00011 Printer User Manual


 
t
hnfnediate print
Mode ASCII
Decimal
Hexadecimal
<ESC> -i,, “~,,
27 105 49
IB 69
31
Both
c ES(J> “i”
<1>
27 105 1
IB 69 01
Selects the immediate print mode, in which the printer prints each
character as soon as received.At every pause in the incomingdata stream
the printer scrolls the paper up about 2 inches so that the current line
can be seen. When the next character is received the paper is scrolled
back downand printingcontinues. Thiscommandosignoredwhenfriction
feed is used.
Cancel immediate print
IModel ASCII I Decimal I Hexadecimal I
<~s~ > q>> ‘,0>>
27 105 48 IB 69 30
Both
<ESC> “i”
<()>
27 105 0
IB 69 00
Cancds the immediate print mode. The printer waits for each line to be
completed before printing it, and does not scroll the paper up and down.
This command is ignored when friction feed is used.
Set printer off-line
Mode ASCII
I
Decimal
I
Hexadecimal
I
Std.
I
<DC3>
I 19
113
I
IBM [
<ESC>
“Q” <3>
I 27 81 3 IIB 51 03
1
Sets the printer off-line.The printer disregards all subsequent characters
and commands except < DC1>, which returns it to the on-line state.
The printer’s On Line indicator does not go off.
Set printer on-line
Mode ASCII
I
Decimal
I
Hexadecimal
I
Both
<DC1>
17 I 11
I
Returns the printer to the on-line state, allowingit to receiveand process
all subsequent characters and commands. This command is ignored if
the printer was set off-line by pressing the On Line switchon the control
panel.