Filter
Top Products
P
i.
k
—.
:
.
—
—
Cancels all current vertical tab stops and sets new vertical tab stops at
lines nl,
n2, etc., where nl, n2, etc. are numbers between 1 and 255. A
maximum of 16 vertical tab stops can be set. The tab stops must be
specifiedin ascending order; any violation of ascending order terminates
the tab stop list. Standard termination is by the <0> control code. The
vertical tab stops are set in terms of the current line spacing and do not
move if the line spacing is changed later.
Set vertical tab stops every n /ines
Mode ASCII Decimal Hexadecimal
< EWJC> “e,, “1,. n
Both
27
101 49 n
IB 65 31 n
<Esc > “e” <1> n
27 101 1 n IB 65 01 n
Cancels all current vertical tab stops and sets new tab stops everyn lines,
where n is between 1 and 127.
Set vertical tab stops in channel
IModel ASCII
I Decimal
] Hexadecimal I
<ESC>
“b”
nO nl
Both
27 98 nO id IB 62 nO nl
n2 .~O~ n2 ...0 n2 ...00
Cancels all current vertical tab stops in channel nO,(wherenois between
Oand 7) and sets new vertical tab stops in this channel. (A channel is a
set of vertical tab stops selected by the < ESC> “/” command.) See
< ESC> “B” for parameters nl, n2, ... <0>.
Select vertical tab channel
IModel ASCII
I Decimal
I Hexadecimal I
IBothI <ESC> “/” nO I27 47 nO IIB 2F nO I
Selects a set of vertical tab stops designated by a channel number
(no)
from Oto 7. The tab stops in each channel are set by < ESC> “b”.
Vertical tab
IMode! ASCII
I Decimal
I Hexadecimal I
Both
<VT>
I
11
1
OB
1
Feeds the paper to the next vertical tab stop and moves the print position
to the left margin. Performs a line feed if no vertical tabs are set, as at
power-up. Feeds to the top of the next page if vertical tabs are set but
the current line is at or below the last vertical tab stop.