Star Micronics NX-I 00011 Printer User Manual


 
...
~,:
I
*
L—.—
I
..
,——
1
I
,
b
-
..
.
.’ “, ,.
Cancels all current horizontal tab stops and sets new tab stops every n
,, .
columns, where n is between 1 and 127.
Reset all tab stops
Mode
ASCII
Decimal Hexadecimal
IBM <ESC>
‘.R9,
27 82 IB 52
Resets the horizontal tab stops to their power-up values in which a tab
stop is set every 8 column starting at column 9. Also clears all vertical
tab stops.
Horizonta/ tab
Mode
ASCII
Decimal Hexadecimal
Both
<HT>
9 09
Moves the print position to the next horizontal tab stop. Ignored if there
is no next horizontal tab stop in the current line. Note that when un-
derlining is selected, spaces skipped by horizontal tabulation are not
underliried.
Re/ative horizontal tab
Mode
ASCII
Decimal Hexadecimal
std.
\
<
ESC> “ “ nl n2 27 92 nl n2 IB SC nl n2
IBM
\
<FS> “ “ nl n2
28 92
nl n2 IC SC nl n2
Moves the print position right or left a specified distance (maximum 6
inches).Ignored if the resultingposition is beyondthe right or left margin.
The formulas for the distance and direction are as follows:
If
n2is betweenOand 63,the print head movesright by(n] + n2x 256)/120
inches
If
n2 is between 64 and 127, the print head moves left by (nl +
[n2– 64] x
256)/120inches
Absolute horizontal tab in inches
Mode
ASCII Decimal Hexadecimal
Both < ESC>
ni n2
$
27 36 nl n2 IB 24 n] n2
Sets the next print position to (nl + n2 x 256)/60 inches from the left
margin on the current line. Ignored if this position is beyond the right
margin. The maximum position is 8 inches.