Filter
Top Products
i-
k
r
The first eight of these character sets (from U.S.A. to Spain I) can be
selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of all character codes
Mode ASCII
Decimal
I
Hexadecimal
IBM
<ESC> “\”
nl n2
27 92 nl n2
IB SC
nl n2
Enablesprinting ofall characters in the IBM character set, includingthose
assignedto character codes whichare normally consideredcontrol codes.
This command remains in effect for the next nl + n2x 256 characters,
where nl and n2 are numbers between Oand 255. During this interval
no control functions are executed. If a code with no assigned character
is received, the printer prints a space.
Enable printing of all character codes on next character
Mode ASCII
Decimal
Hexadecimal
IBM
I
<~~~> “.3,
I 27 94
IIB 5E
I
This command operates like < ESC> “\” except that it remains in effect
for only one character.
Select s/ash zero
Mode ASCII
Decimal
Hexadecimal
< ESC >
“-” “1”
Both
27 126 49
IB 7E 31
<ESC>
“-” <1>
27 126 1
IB 7E 01
Causes subsequent zero characters to be overprinted with a slash (0).
Select normal zero
Mode ASCII
Decimal
Hexadecimal
< ESC >
0
“-” “ “
27 126 48
IB 7E 30
Both
<
ES(7>
“w”
<o>
27 126 0
IB 7E 00
I
I
—--
,
!
Causes subsequent zero characters to be printed normally (0), without
a slash.
65