Filter
Top Products
Left justify
IModel ASCII I Decimal I Hexadecimal I
c ESC> “a”
syy,
27 97 48
Both
IB 61 30
<ESC> “a”
<l)>
27 97 0
IB 61 00
Aligns subsequent text with the left margin, leaving the right margin
ragged.
Center text
Mode
ASCII
I
Decimal
I
Hexadecimal
<ESC> “a” “1”
Both
27 97 49 IB 61 31
<ESC> “a”
<1>
27 97 1 IB 61 01
Centers subsequent text between the left and right margins.
Right
justify
Mode ASCII Decimal Hexadecimal
c ESC> “a” “2”
Both
27 97 50 IB 61 32
<ESC> “a” <2>
2’7 97 2 [B 61 02
&
Aligns subsequent text with the right margin, leaving the left margin
ragged.
Set horizontal tab stops
Model ASCII
I
Decimal
I
Hexadecimal
1
BothI
<ESC>
‘.~n ~~
n2 ...<0> 27 68
nl d ...0 IB 44 nl n2...00
Cancels all current horizontal tab stops and sets newtab stops at columns
nl, n2,etc. in the current character pitch (picapitch if proportional spacing
is currently selected), where nl, n2, etc. are numbers between 1and 255.
The maximum number of horizontal tab stops allowed is 32 in Standard
mode and 28 in IBM mode. The tab stops must be specifiedin ascending
order; any violation of ascending order terminates the tab stop list.
Standard termination is by the <O> control code. To clear all tab stops,
specify < ESC> “D” <0 ~.
Set horizontal tab stop every n cohrmns
Model ASCII
I
Decimal
I
Hexadecimal
I
<Esc > -e!* “(),? ~
Both
27 101 48
n IB 65 30 n
<Esc > “e” <()> n
27
101 0 n IB 65 00 n