Star Micronics NX-I 00011 Printer User Manual


 
A few installation programs may ask you not to selecta printer but to
describe what your printer can do. The answers to the most often asked
questions are: Yes, this printer can do a backspace; and Yes, it can do a
hardware form feed.
Selecting (or describing) a printer is the main step in the installation
process and frequently the only step necessary. If you selected this printer
or any Star, Epson or IBM printer you should be able to use software
commands for all the standard printer functions, including bold or dou-
ble-strike printing, underlining, subscripts, superscripts, margin control,
line-spacingcontrol, and graphics.
Printer command options
Besidesthe standard printer functions,however,your printer has some
capabilities your software may not be aware of, including double- and
quadruple-size printing and the printing of special characters assigned to
control codes.Somesoftwareenablesyou to definethesecapabilitiesas user
options in the installation process. Read your software manual to find out
whether you can do this and if so, how.
The most usefulthing you can do is to definea way to enter the escape
code < ESC>, which is the control character with decimal character code
27 (hexadecimalIB). This code usuallycannot be keyedin directly(pressing
the ESC key will not work). As an installation option, however, you may
be able to assign it to a function key or a specialkey combination. Doing
so will put the full power of the printer at your disposal.
Type styles
Some word-processing software has commands that enable you to
change type stylesin the middle of a document without a printing pause.
To use these commands you must generally definethe printer’s type styles
(fonts) during installation, by assigningthem numbers for example. Read
your software manual for details, and refer to Appendix B for the relevant
printer commands.
Page width
Spreadsheetprograms in particular may ask you to specifythe printer’s
column width. The column width of this printer depends on the character
pitch used:
Pica 80 columns
Elite 96 columns
Condensed pica
137columns
Condensed elite 160columns (Standard mode only)
.
32