Filter
Top Products
Powering Off and On 12-5
12
Figure 12-4 AC Power Switch and Power Receptacle
(Standalone Server)
12.2 Removing the External Cables
1. Position the server for easy access to the rear.
2. Enterprise 6000/5000 systems only: remove the rear screen panel and the
kick panel by loosening the screws.
Both the rear screen panel and kick panel are attached with two screws. See
Figure 12-5.
Note – If your system cabinet has a hinged rear door, use the sliding door latch
to open the door, remove the kick panel (if necessary), and proceed to Step 3.
AC power switch
AC connector