Filter
Top Products
I/O Boards and Components 4-19
4
This screen output indicates that the board has been detected by the system
and is in the low power mode. Additionally, any subsequent prtdiag(1M)
output would include information for board slot 6. Again, note that the
system will not use the new board until the system is rebooted.
8. Reboot the system now or schedule a later time to reboot when system
disruption will be minimized.
4.5.4 SBus Cards
There are three SBus card locations on the SBus I/O board; the Graphics I/O
board has two. Figure 4-13 shows the SBus card locations for both types of
boards.