Index-4 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996
L
LEDs
board, 7-11
clock, 9-3
CPU/Memory, 9-3, 9-5
disk, 5-5
front panel, 7-4, 9-3, 12-8
power supply, 7-4
modular, 9-6
peripheral, 9-5
leveling pads, adjust, 13-11
link integrity test, 4-24
description, 4-6
disabling and enabling, 4-26
load board
filler panel, 4-3
local/remote switch, 12-7
loss of carrier message, 4-24
M
memory module
configuration, D-4
install, 3-21
remove, 3-20
message, boot, 12-10
modular power supply
LED codes, 9-6
module, UltraSPARC, 3-14
description, B-8, D-3
N
network interface, B-12
troubleshooting, 9-11
not responding message, 4-24
O
open CD-ROM/tape device door, 13-3
OpenBoot, description, 9-9
options, internal, 1-7
outer covers See panel, remove
overview, system, 1-1, B-1
P
panel
remove
guide to removing, 13-2
hinged front, open, 13-4
kick, 13-10
power supply cover, 13-8
rear screen, 13-6
side, 13-7
top front bezel, 13-3
replace
kick, 13-10
power supply cover, 13-8
rear screen, 13-6
side, 13-7
top front bezel, 13-4
parts, illustrated See illustrated parts
breakdown
PCM, 9-5
description, 7-8 to 7-11
replace, 7-11 to 7-15
peripheral power supply
description, 7-3
LED codes, 9-5
replace, 7-4 to 7-8
physical specification, A-1
POST
description, 9-9
LEDs, front panel, 12-8
restart, 12-9
power
AC switch, 12-5
and cooling issues, 3-11
cord
remove, E-4
replace, E-5
off, system
Enterprise 4000, 12-3
Enterprise 6000/5000, 12-1
on, system, 12-7
sequencer
remove, E-6 to E-7
replace, E-7
power supply