Filter
Top Products
E-8 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996
E
2. Grasp the front bezel on both sides at the top and pull out far enough to
disengage the ball studs.
Caution – To prevent breakage, do not grasp the bezel by the bottom edge.
See Figure E-4.
Figure E-4 Removing the Front Bezel
3. Remove the bezel and set it aside.
4. Open the hinged door on the front panel by grasping the handle (purple
extruded strip on the vent edge) on the right side of the second panel, and
pulling it firmly toward you.
The door is released and swings open if pulled firmly.
5. Remove the side panel closest to the key switch assembly.
See Chapter 13, “Preparing for Service,” for information on removing the
side panel.
6. Remove the fan tray shelf cover.
Remove the 10 screws attaching the cover to the cabinet.
!