Filter
Top Products
iv Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
3. Using DC Power 3-1
3.1 Grounding the Netra 120 Server 3-2
3.2 Assembling the DC Power Connectors 3-3
3.2.1 The Insulated Conductors You Need to Use 3-3
3.2.2 Assembling the DC Input Power Cable 3-3
3.2.3 Installing the Strain Relief Housings 3-7
4. Installing Optional Hardware Components 4-1
4.1 Installing and Removing Hot-Pluggable SCSI Hard Disk Drives 4-2
4.2 Opening the Server 4-4
4.3 Identifying Server Components 4-6
4.4 Installing and Removing a DVD or
CD-ROM Drive 4-7
4.4.1 Installing a DVD or CD-ROM Drive 4-7
4.4.2 Removing a DVD or CD-ROM Drive 4-9
4.5 Installing and Removing Memory 4-9
4.6 Installing and Removing a PCI Card 4-11
4.6.1 Installing a PCI Card 4-11
4.6.2 Removing a PCI Card 4-14
4.7 Replacing the Server’s Top Cover 4-14
5. Installing the Server Into a Rack 5-1
5.1 Installing Into a 19-Inch Four-Post Rack 5-2
5.1.1 The 19-Inch Rackmounting Kit 5-2
5.1.2 Assembling the Slides and Mounting the Server 5-3
5.1.3 Fitting the Cable Management Bracket 5-10
5.1.4 Tips for Using a Sun StorEdge 72-inch Rack 5-11
5.2 Installing Into a Two-Post Relay Rack 5-12
5.2.1 The Fixed Mounting Bracket Kit 5-12
5.2.2 Attaching the Fixed-Mounting Brackets 5-12