Filter
Top Products
4-1
CHAPTER
4
Installing Optional Hardware
Components
If you do not want to install any optional hardware components, skip this chapter
and go straight to Chapter 5, which tells you how to install the Sun Fire V120 and
Netra 120 servers into a rack.
This chapter tells you how to install or remove the hot-pluggable Hard Disk Drives.
To do this, you do not need to power off the server or remove it from the rack. This
chapter also tells you how to remove the cover of the server, how to identify the
parts of the server, how to install a DVD or CD-ROM drive, and how to install
DIMMs and a PCI card.
For the part numbers of the hardware components available from your local Sun
sales representative, see Section 1.3, “Optional Hardware and Software” on page 1-5.
This chapter contains the following sections:
■ Section 4.1, “Installing and Removing Hot-Pluggable SCSI Hard Disk Drives” on
page 4-2
■ Section 4.2, “Opening the Server” on page 4-4
■ Section 4.3, “Identifying Server Components” on page 4-6
■ Section 4.4, “Installing and Removing a DVD or CD-ROM Drive” on page 4-7
■ Section 4.5, “Installing and Removing Memory” on page 4-9
■ Section 4.6, “Installing and Removing a PCI Card” on page 4-11
■ Section 4.7, “Replacing the Server’s Top Cover” on page 4-14