Tally Genicom 8026DN Printer User Manual


 
Jun 06
1-12 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Loading Paper
Loading Paper
This section describes how to load paper. Load paper correctly to reduce troubles such as paper
jams.
Important
See the package of paper to determine the front and back sides of the paper when loading it.
Refer to
Types of paper suitable for printing: “Loading Paper” (P. 2-11)
Loading paper in the multipurpose feeder: “Loading Envelopes in the Multipurpose Feeder”
(P. 1-15)
Loading Paper in the Multipurpose Feeder
In addition to plain paper, the multipurpose feeder can use various other sizes and types of print
media such as envelopes and transparencies.
Make sure of the following points when loading paper in the multipurpose feeder.
You can load up to 150 sheets or a stack of paper (60 g/m
2
to 216 g/m
2
) less than 15 mm
(0.6") high.
The multipurpose feeder accepts print media within the following dimensions:
– Width: 88.9 mm (3.5") to 220 mm (8.7")
– Length: 139.7 mm (5.5") to 355.6 mm (14")
You can load paper (64 g/m
2
to 105 g/m
2
) up to 900 mm (35.4") long. However, paper over
355.6 mm (14") in length has to be fed one sheet at a time and supported by hand.
Important
Make sure of the following points to avoid any troubles during printing.
Do not load different types of paper at the same time.
Use high quality paper for laser printers to print at high quality. Refer to “Paper Handling”
(P. 2-6) for details.
Do not remove or add paper to the multipurpose feeder when printing or if there is any paper
still in the multipurpose feeder. Doing so may cause a paper jam.
Load paper printable surface facing down. Also, load the paper which you want to print on
first in the top of the multipurpose feeder.
Do not put any objects other than paper on the multipurpose feeder. Also, do not push or
force down the multipurpose feeder.