Filter
Top Products
Jun 06
2-18 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Cleaning the Printer
Cleaning the Density Sensor
When the printers density sensor is dirty, follow the procedure below to clean it.
CAUTION
• Do not touch the edge of the plate at the upper side of the transfer roll cartridge because it is
sharp.
1. Turn off the printer.
2. Push up the button 1 and fully open the front cover 2.
3. Grip the tabs at both ends of the transfer roll cartridge and gently lift it out of the printer.
NOTE: Do not touch inside the printer with your hands. Some parts may be hot. Allow time
for the printer to cool before attempting to remove parts in this area.