Filter
Top Products
Jun 06
3-14 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Warning Messages and Error Messages
Error Messages
The table below lists error messages, the possible causes of each error, and the actions
required to recover from each error.
Error Message Possible Cause Action
Load Paper Tray [x]
[type] [size]
There is no paper or wrong paper in
tray [x]
Add correct paper type to
corresponding tray
Tray [x] Missing
Insert Tray
Tray [x] is out of printer Insert the corresponding tray into
printer
Front Cover Open
Close Cover
The front cover is open Close the front cover
Feed Jam
Check Tray [x]
A paper jam has occurred in tray [x] Remove jammed paper from
corresponding tray
Registration Jam
Open Cover A
A paper jam has occurred inside of
printer
Open cover A and remover the
jammed paper
Registration Jam
Open Cover B
A paper jam has occurred inside of
printer
Open cover B and remove the
jammed paper
Fuser Jam
Open Cover B
A paper jam has occurred inside the
printer
Open cover B and remove the
jammed paper
Duplex Jam
Open Cover B
A paper jam has occurred inside the
printer
Open cover B and remove the
jammed paper
Fuser Missing
Install Fuser
The fuser is missing from the printer Re-install the fuser
BTR Missing
Install BTR
The BTR is missing from the printer Re-install the BTR
PHD Missing
Install PHD
The process unit is missing from the Re-install the PHD (process) unit
Toner [x] Missing
Install Toner [x]
Toner cartridge [x] is missing Re-install the corresponding toner
cartridge
Fuser Life Over
Replace Fuser
The fuser unit needs to be replaced Replace the fuser unit
BTR Life Over
Replace BTR
The BTR unit needs to be replaced Replace the BTR unit
PHD Life Over
Replace PHD
The process unit needs to be
replaced
Replace the PHD (process) unit.
Toner [x] Empty
Replace Toner
Toner cartridge [x]is empty Replace toner cartridge [x]
Fuser Type Err
Install / Reset
Wrong fuser unit installed Re-install or replace with correct
fuser
Fuser Type Err
Install / Reset
Wrong fuser unit installed Re-install or replace the fuser unit