Tally Genicom 8026DN Printer User Manual


 
Jun 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 3-15
Warning Messages and Error Messages
PHD Type Err
Install / Reset
Wrong PHD (process) unit installed Re-install or replace the PHD unit
Toner [x] Type Err
Install / Reset
Wrong Toner [x] cartridge installed Re-install or replace the toner
cartridge
CRUM ID: Fuser
Replace Fuser
Wrong Fuser unit installed Replace with correct fuser
CRUM ID: PHD
Replace PHD
Wrong PHD installed Replace with the correct PHD
CRUM ID Error: [x]
Replace Toner
Wrong Toner cartridge [x] installed Replace with the correct toner
cartridge
CRUM Failure: [x]
Replace Toner
CRUM unit faulty Replace toner cartridge [x]
[x] Tape Remaining
Check Toner
Toner cartridge [x] tape not removed Remove tape from cartridge
CTD Sensor Dusty
Clean CTD Sensor
Toner density sensor is dusty Clean the toner density sensor
Fuser ID Warning
Install / Reset
Fuser CRUM faulty Re-install or replace fuser unit
PHD ID Warning
Install / Reset
PHD CRUM faulty Re-install or replace the PHD unit
Toner [x] ID Warning
Replace / Reset
Toner [x] CRUM faulty Re-install or replace the Toner
cartridge
Dev [x] Life Over
Install / Reset
Developer [x] needs to be replaced
Out of Memory
Press Start
Insufficient memory to complete job Add more memory
Clock Not Set
Press Start
Real time Clock not set Set the time and date
Error: You Must
Turn DHCP Off
Trying to set IP address with DHCP
turned on
Turn off DHCP before manually
setting IP address
IPADDR Collision
Press Start
IP packet collision Press start to continue
NVRAM Error xx
Press Start
Memory problem Press start to continue
Ready
Maintenance Reqd.
Printer has printed 300,000 pages Call for service
ROS Failure
Call Service
ROS faulty Call for service
Error Message Possible Cause Action