Tally Genicom 8026DN Printer User Manual


 
Jun 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 1-19
Loading Paper
Connecting the Power Cord
WARNING
The Power specifications are listed below. The specifications that apply to your machine
depend on your machine configuration. Connect the power plug only to a properly rated
power outlet. Otherwise, it can cause fire or electric shocks.
Rated voltage 100–120 V
Rated frequency 50/60 Hz
Rated voltage 220–240 V
Rated frequency 50/60 Hz
Never use multi-plug adaptors to plug multiple power plugs in the same outlet. Be sure to
operate the machine on a sole-use receptacle. Multiple connectors can cause the outlet to
overheat and cause fire.
To prevent fire or electric shocks, follow the instruction below based on your machine
configuration.
If your machine is a 220 – 240 V model, there is no need to attach a separate earth line since
the earth connection is incorporated in the power line. Plug it into a properly rated outlet.
If your printer is a 100–120 V model, use the earth bundled with the power cord, located at
the rear of the printer. The earth wire must be connected to one of the following conductors:
– Earth terminal of the specified power outlet
– A piece of copper buried in the earth 650 mm (25.6") or deeper
– Earth terminal with Class D* earthing.
*Class D is the regulation for Japan only.
1. Connect the power cable into the printer, and plug it into the electrical wall outlet.