Filter
Top Products
TANDBERG Content Server printable online help 107
Shutting down and restarting the Content
Server
The Content Server can be shut down using the LCD panel. TANDBERG recommends that you end
all calls on the Content Server before you shut down; otherwise the conferences may fail.
Note: If calls are in progress when the shut down occurs, the recorded conferences appear in the
Recorded conferences list but may be unusable. They can be deleted in the normal way.
LCD status display and button functions
online
The Content Server is ready to accept calls and transcode outputs but none are
currently in progress.
1-5 calls
Calls are in progress on the Content Server.
transcoding
The Content Server is transcoding.
Server modes
config reload
The Content Server is in Reloading Configurations mode. In Reloading
Configurations mode, the Content Server does not accept new calls.
1-5 calls (cnfg)
Calls are in progress and the Content Server is in Reloading Configurations mode.
trans (cnfg)
The Content Server is transcoding and is in Reloading Configurations mode.
idle
The TCS Wizard is running. In Idle mode, the Content Server does not accept new
calls or process new transcoding jobs.
1-5 calls (idle)
The TCS Wizard has started while there is a call in progress.
trans (idle)
The TCS Wizard has started while there is a transcoding process in progress.
maintenance
The Content Server is in a cluster and has been set to Maintenance mode. The
Content Server will not accept new calls or process new transcoding jobs.
1-5 calls (maint)
Calls are in progress and the Content Server is in Maintenance mode.
trans (maint)
The Content Server is transcoding and is in Maintenance mode.
upgrading
This Content Server, or a Content Server in the cluster, is being upgraded.
Error states
Error
The Content Server is out of disk space or has lost connection to the NAS.
No network
The Content Server has no connection to the network.
Buttons
Enters Edit mode, confirms an entry.
Returns to the previous menu, exits Edit mode without saving.
and
Moves between menu items, moves between values in a numerical address and
modifies numerical values.