Filter
Top Products
TANDBERG Content Server printable online help 92
Field
Field description
Usage tips
Q.931 ports in the Gatekeeper
settings section above.
The port range specified in Port
Range, above for example 3230
to 3270. Contact your TANDBERG
reseller for more information.
SIP settings
Registration
status
Displays the status of Content Server‘s
registration with the SIP registrar.
Click View all SIP registrations to
display a page showing all the system
and Recording alias registration details.
See Displaying SIP registrations.
SIP enabled
Select to enable registration with a SIP
registrar. SIP is not available for a cluster.
Enter the SIP display name, SIP
address (URI), Server address and
choose the Transport.
SIP display
name
The Content Server‘s SIP display name.
This is presented as a description of the
SIP URI by the SIP registrar to other
systems.
SIP address
(URI)
Other systems can call the Content Server
using the SIP Address or URI (Uniform
Resource Identifier) if the Content Server
is registered to a SIP registrar. The
Recording alias specified in the Default
Recording aliases below is used for the
call.
Server
discovery
Always Manual.
Server
address
The IP address or DNS name of the SIP
registrar.
When changing the address of the SIP
registrar, you need to change the server
address in all SIP URIs of Recording
aliases; for example, from
SIPalias@SIP.registrar.1 to
SIPalias@SIP.registrar.2.
Server type
Always Auto, which supports registering to
standard SIP registrars such as
OpenSIPS.
Transport
The transport protocol for SIP. The default
is TCP (Transmission Control Protocol).
UDP (User Datagram Protocol) can also
be used.
User name
The user name to authenticate to the SIP
registrar.
Password/Pas
sword confirm
The password to authenticate to the SIP
registrar.
Authentication
Authentication
Choose the authentication method for the
Content Server.
There are three modes of authentication
(for more information see