TANDBERG MCU 4500 Computer Hardware User Manual


 
144
Allow/reject incoming calls to the MCU using
H.323 or change the port that is used for this
service.
Disabling this option will not prevent outgoing
calls to H.323 devices being made by the MCU.
That is, the MCU will need to dial out to
conference participants who are using H.323.
If a port is disabled, this option will be
unavailable.
Allow/reject incoming calls to the MCU using
SIP over TCP or change the port that is used for
this service.
Disabling this option will not prevent outgoing
calls to SIP devices being made by the MCU. That
is, the MCU will need to dial out to conference
participants who are using SIP over TCP.
If a port is disabled, this option will be
unavailable.
Allow/reject incoming encrypted SIP calls to the
MCU using SIP over TLS or change the port that
is used for this service.
Disabling this option will not prevent outgoing
calls to SIP devices being made by the MCU. That
is, the MCU will need to dial out to conference
participants who are using SIP over TLS.
If a port is disabled, this option will be
unavailable.
Allow/reject content streams using BFCP (Binary
Floor Control Protocol).
Disabling this option will prevent BFCP content
being used in any conferences. BFCP can be used
to allow SIP endpoints to contribute and receive
content. For more information, refer to Content
channel video support.
Allow/disable streaming from the MCU to
Windows Media Player or change the port that is
used for this service.
If a port is disabled, this option will be
unavailable.
For more information about streaming, refer to
Configuring streaming settings.
Allow/disable RTSP (Real Time Streaming
Protocol) streaming from the MCU to
QuickTime or RealPlayer or change the port that
is used for this service.
If a port is disabled, this option will be
unavailable.
For more information about streaming, refer to
Configuring streaming settings.
Enable/disable FTP access on the specified
interface or change the port that is used for this
service.
FTP can be used to upload and download MCU
configuration.
You should consider disabling FTP access on any
port that is outside your organization's firewall.
If a port is disabled, this option will be
unavailable.